Heated Vest Liner | Gen-X3

NOTE: The video above is a review of the men's heated vest liner. Click here to view the French language version.

Info

Innovative Design

• Ergonomically designed to hug the contours of your body
• Premium heating wire made in the USA
• Uniform heat delivered all over the front, back, and collar
• Two easily accessible side pockets on the front of the vest to keep a wallet or other essentials
• The bottom edge of the vest lands just above the beltline thus maintaining your range of motion
• Anti-bacterial, breathable, and water-resistant fabric
• Pairs seamlessly with our heated gloves or glove liners (see wiring tab for more info on this)

Choosing the Correct Size

1. Make sure you are wearing only a t-shirt
2. Measuring your chest (just under the arms), and then your stomach
3. Take the larger of these two measurements as your reference point
4. A 42 size vest is a good fit for a person with a 42-inch reference point (when worn properly the vest should hug the contours of your body)

Optional Portable Battery Add-on

Consider purchasing one of our Heated Clothing Portable Battery Kits if you'd like to use your heated vest when you get off your vehicle. In other words, a portable battery will allow you to use this vest while skiing, snowboarding, or just taking a walk on a cold day.

Manual

Click here to view the PDF instruction manual in a new tab

GEARS CANADA DIRECT ADVANTAGE:

1 YEAR WARRANTY	EASY RETURNS

Wiring

One 20" long Coax Battery Cord (SKU 100227-1) is included

You will require ONE of the below switch cords OR temperature controller

• Male Coax to Female Coax Switch Cord (SKU 100222-1)
• Dual coax switch cord (SKU 100225-1)
• Required only if you plan to use the heated gloves or glove liners in conjunction with this heated vest
• Allows you to turn this vest and your gloves ON or OFF individually
• Single temperature controller (SKU 100230-1)
• Dual temperature controller (SKU 100231-1)
• Required only if you plan to use a Gears heated glove in conjunction with this heated vest
• Allows you to maintain the glove and vest at different temperatures

Also...

• You will need the Snap-on Harness (SKU 100226-1) ONLY IF you intend on connecting any of the following to this vest:
• Gen-X3 Heated Gloves
• Gen-X4 Heated Gloves
• Gen-X3 Heated Glove Liners
• Gen-X4 Heated Glove Liners

IMPORTANT NOTE: The Gen-X3/X4 line of heating clothing is not compatible with the Gen-X2 line of heated clothing. Any attempt to do so with ruin the heated clothing, and VOID your warranty immediately! Only heating elements are covered under warranty. Normal wear and tear is not a warrantable defect.

Seamless Connectivity Diagram

If you own other pieces of Gears heated clothing, you can easily add this to your setup! The diagram below illustrates how to connect our heated clothing seamlessly. Gen-X3 and Gen-X4 are compatible with one another. Note that the heated jacket in the diagram below can be swapped with the heated vest.

Watch the video below for a walkthrough on connecting our heated clothing 

FAQs

Q: Will this work alongside other brands of heated clothing?

A: Yes! All our heated clothing is compatible with Firstgear, Gerbing, Warm & Safe, and Venture Heat.

-----------

Q: What is the difference between Gen-X3 and Gen-X4?

A: Gen-X3 uses a copper-based heating element (made in the USA), whereas Gen-X4 uses Zepto fibres (made in France). Thus, Gen-X4 heats up faster, generates more heat, and is lighter. Both are amazing products, but Gen-X4 is just a little bit of an upgrade!

-----------

Q: What are the specs?

A: The specs vary depending on the size.

Size 34: Provides 40.8 watts of heat and draws 3.4 amps of current

Sizes 36 - 52: Provides 48 watts of heat and draws 4 amps of current