- Leverages ZEPTO® fibre technology; made in France, these heating fibres are so thin you wouldn't be able to notice them if not for their tremendous heat output
- Soft, drum-dyed leather construction with an extra-long gauntlet and hook-and-loop closure around the wrist for a snug fit
- Heats the entire length of each finger, thumb, and back of the hand
- Innovative rain squeegee wiper on the thumb of the left glove to help wipe the water off your helmet visor
- Windproof and waterproof breathable PORELLE insert keeps hands dry
- Engineered to pair seamlessly with our Gen-X3/X4 Heated Jacket Liner or Gen-X3/X4 Heated Vest Liner
Please see the table below and determine what scenario applies to you. The required wiring must then be added to your cart, as it is sold separately.
Scenario |
Required Wiring |
|---|---|
|
You already own a GEARS Gen-X3 or Gen-X4 Heated Jacket Liner AND a Single Switch Cord (SKU 100222-1) OR Single Temperature Controller (SKU 100230-1) OR a ZR8 Heated Clothing Portable Battery |
|
|
You already own a GEARS Gen-X3 or Gen-X4 Heated Vest AND a Single Switch Cord (SKU 100222-1) OR Single Temperature Controller (SKU 100230-1) OR a ZR8 Heated Clothing Portable Battery |
Snap-on Harness for Heated Gloves & Glove Liners (SKU 100226-1) AND Male Coax to Dual Female Coax Adapter (SKU 100229-1) |
| You already own a GEARS Gen-X3 or Gen-X4 Heated Jacket Liner AND a Dual Temperature Controller (SKU 100231-1) |
No additional wiring is required. Simply connect the glove liners to the male coax plugs at the end of the jacket's sleeves. |
| You already own a GEARS Gen-X3 or Gen-X4 Heated Vest AND a Dual Temperature Controller (SKU 100231-1) |
Snap-on Harness for Heated Gloves & Glove Liners (SKU 100226-1) |
| You want to power these heated gloves from your powersport vehicle's 12V battery AND won't be using any other heated clothing AND want to fine-tune their temperature. |
Coax Battery Cord (SKU 100227-1) AND Y-cord with Temperature Controller for Heated Gloves & Heated Glove Liners (SKU 100273-1) |
| You want to power these heated gloves from your powersport vehicle's 12V battery AND will be using heated socks or insoles AND want to fine-tune their temperature independently. This is a common scenario for riders who only care to warm their hands and feet. |
Coax Battery Cord (SKU 100227-1) AND Dual Temperature Controller (SKU 100231-1) AND Y-switch-cord for Heated Gloves & Glove Liners (SKU 100228-1) AND Y-switch-cord for Heated Socks/Insoles (SKU 100233-1) |
| You want to power these heated gloves from your powersport vehicle's 12V battery AND will be using heated socks or insoles AND want to fine-tune their temperature AND want everything at the same temperature. This is a common scenario for riders who only care to warm their hands and feet. |
Coax Battery Cord (SKU 100227-1) AND Single Temperature Controller for Heated Clothing (SKU 100230-1) AND Male Coax to Dual Female Coax Adapter (SKU 100229-1) AND Y-switch-cord for Heated Gloves & Glove Liners (SKU 100228-1) AND Y-switch-cord for Heated Socks/Insoles (SKU 100233-1) |
|
You want to power these heated gloves from the ZR8 or ZR5 Heated Clothing Portable Battery AND you won't be using any other heated clothing. |
|
|
You want to power these heated gloves from the ZR8 Heated Clothing Portable Battery AND will be using heated socks or insoles. This is a common scenario for people who only care to warm their hands and feet during outdoor activities. |
Male Coax to Dual Female Coax Adapter (SKU 100229-1) AND Y-switch-cord for Heated Gloves & Glove Liners (SKU 100228-1) AND Y-switch-cord for Heated Socks/Insoles (SKU 100233-1) |
Click here to view the instruction sheet in a new tab.
Seamless Connectivity Diagram
If you own other pieces of GEARS heated clothing, you can easily add this to your setup! The diagram below illustrates how to connect our heated clothing seamlessly. Gen-X3 and Gen-X4 are compatible with one another. Note that the heated jacket in the diagram below can be swapped with the heated vest.
Connecting Various Pieces of GEARS Heated Clothing
FAQs
Q: What are the specs?
A: These gloves operate in a parallel wherein each glove uses 12 volts. As a pair, they draw 2.1 amps of current to produce 29 watts of heat.
-----------
Q: Will this work alongside other brands of heated clothing?
A: Yes! All our heated clothing is compatible with Firstgear, Gerbing, Warm & Safe, Tourmaster, and Venture Heat. You may need an adapter such as our SKU 100386-1 or 100389-1.
-----------
Q: What is the difference between Gen-X3 and Gen-X4?
A: Gen-X3 uses a copper-based heating element (made in the USA), whereas Gen-X4 uses Zepto fibers (made in France). Thus, Gen-X4 heats up faster, generates more heat, and is lighter. Both are amazing products, but Gen-X4 is just a little bit of an upgrade!
-----------
Q: My powersport vehicle has an SAE lead installed on its 12V battery, intended for connection to a trickle charger or battery maintainer. Is it possible to use this SAE lead to bring power to my heated clothing?
A: Yes! You just need to buy the SAE to Female Coax Adapter (SKU 100252-1). Using this adapter eliminates the need for the Coax Battery Cord (SKU 100227-1).
-----------
Q: My powersport vehicle has a female cigarette lighter socket, also referred to as a 12-volt accessory outlet. Is it possible to power my heated clothing from this socket instead of a direct connection to the vehicle's battery?
A: Yes! You just need to buy the Male Cigarette Lighter Plug to Female Coax Adapter. (SKU 100224-1). Using this adapter eliminates the need for the Coax Battery Cord (SKU 100227-1).
Optional Portable Battery Kit
Consider purchasing one of our Heated Clothing Portable Battery Kits if you'd like to use these heated gloves when you're not riding your powersport vehicle. The portable battery will allow you to use these glove liners while skiing, cycling, or just taking a walk on a cold day. Please carefully review the required wiring table above, as you may need to buy the Y-Glove-Cord for ZR5 & ZR8 Batteries (SKU 100384-1) OR Male Coax to Dual Female Coax Adapter (SKU 100229-1) depending on your scenario.
VISIT OUR WAREHOUSE
32-6635 Kitimat Road
Mississauga, ON, L5N 6J2
Walk-in customers by appointment only (Monday - Sunday between 11 AM and 3 PM)