Cut for the Sea-Doo Spark, not sized by length
Patterned to the Spark hull, so the fabric follows the bow, the handlebar tower and the rear deck. 2UP fits 1-seat and 2-seat Sparks, 3UP fits 3-seat, model years 2014 to 2026, Spark and Spark Trixx.
Solution-dyed polyester, anti-bleed coating, 4-ply double-sewn seams, UV-resistant finish.
On the trailer, the hem and the seat strap do the holding
A shock cord in the hem pulls the cover tight under the hull line, and the included seat strap clips over the seat and under the hull with a quick-release buckle, so nothing balloons on the highway.
Side openings take your own tie-downs. Tie-downs are not included.
The cover stays on while you use the machine
Waterproof fabric, vented on purpose
The fabric itself is 100% waterproof. The vents that stop ballooning on the trailer are open by design, so after a heavy downpour a little water can reach the footwells. That is the ventilation trade-off, not a leak.
Mild soap and water, air-dry, fold into the mesh bag. Backed by our 1-year warranty with easy returns.
What Spark owners say
Will this fit my Sea-Doo Spark?
The GEARS Sea-Doo Spark cover fits the Sea-Doo Spark and the Spark Trixx, model years 2014 to 2026, in two sizes. The 2UP size fits the Spark 2-up and the Spark Trixx 1-up and 2-up, which share the 111 inches hull. The 3UP size fits the Spark 3-up and the Spark Trixx 3-up, which use the 120 inches hull. Choose your size by seat count rather than by model year, because a 1-up Trixx and a 2-up Trixx both take the 2UP cover.
Sea-Doo Spark cover FAQ
Will a Sea-Doo Spark cover fit my Spark Trixx?
Yes. The GEARS Sea-Doo Spark cover is made for the Spark and the Spark Trixx, model years 2014 to 2026. Trixx 1-up and 2-up models take the 2UP size, and the Trixx 3-up takes the 3UP size. The Trixx follows the same hull sizes as the standard Spark, so seat count is the deciding number.
Should I order the 2UP or the 3UP Sea-Doo Spark cover?
Order 2UP if your Sea-Doo Spark is a 2-up or a Spark Trixx 1-up or 2-up, because those models share the 111 inches hull. Order 3UP if your Spark is a 3-up or a Spark Trixx 3-up, which use the 120 inches hull. Pick by seat count, not by year.
Is this a Sea-Doo Spark seat cover?
The GEARS Sea-Doo Spark cover is a full cover, not a seat-only cover. It covers the seat, the handlebar tower and the whole deck down to the hull. The seat zip opens over the Sea-Doo Spark seat so you can lift it for the gas cap without taking the cover off.
Can I reach the gas cap with the cover on the Sea-Doo Spark?
Yes. The seat zip opens so you can lift the Sea-Doo Spark seat, and the fuel fill on the Spark sits under the seat. The same opening reaches the under-seat storage compartment. The cover stays on the machine while you do it.
Is the GEARS Sea-Doo Spark cover waterproof?
The fabric is 100% waterproof. The air vents are open by design, so after a heavy downpour a little water can reach the footwell. That's the ventilation trade-off that keeps the cover from ballooning on the trailer and lets condensation escape, not a leak.
Can I leave the cover on while I trailer my Sea-Doo Spark?
It is built for it. An elastic shock cord in the hem pulls the cover tight to the hull, the included seat strap with a quick-release buckle passes over the seat and under the hull, and the vents let air pass through instead of ballooning the cover. Run your own tie-downs through the side and rear zippered openings for longer runs.
Does the Sea-Doo Spark cover come with tie-downs?
A seat strap with a quick-release buckle and a mesh storage bag are included. Trailer tie-downs are not included. The side and rear zippered openings are there so you can run your own tie-downs through the cover for longer runs.
Does the cover work with LinQ accessories and the Speed Tie system?
Yes. The rear zippered section fits LinQ accessories on the rear deck and reaches the mooring cleats. The front zippered flap at the base of the handlebar tower opens over the Sea-Doo Speed Tie dock lines on 2024 and newer Spark models.
Specifications
- Fits: Sea-Doo Spark and Sea-Doo Spark Trixx, model years 2014 to 2026
- Sizes and seating: 2UP for the Spark 2-up and Spark Trixx 1-up and 2-up. 3UP for the Spark 3-up and Spark Trixx 3-up
- Hull size: 111 inches (2UP), 120 inches (3UP)
- Fabric: Solution-dyed heavy-duty polyester, anti-bleed coating, UV-resistant, 100% waterproof fabric with open air vents
- Seams: 4-ply, double-sewn
- Openings: Seat zip for the gas cap and under-seat storage, front zip over the Speed Tie dock lines, rear zip for LinQ accessories, mooring cleats and tie-downs, side zips for your own tie-downs
- Fit hardware: Elastic shock-cord hem, handlebar pouches, seat strap with quick-release buckle
- Included: Cover, seat strap with quick-release buckle, mesh storage bag
- Not included: Trailer tie-downs
- Origin: Designed by GEARS in Ontario, Canada
- Warranty: One year
#SeizeYourAdventure
Dock, driveway, trailer or lake. Designed by GEARS in Ontario, Canada, where we have built covers and riding gear for Canadian powersports since 2002.
YOU MAY ALSO LIKE...
VISIT OUR WAREHOUSE
32-6635 Kitimat Road
Mississauga, ON, L5N 6J2
Walk-in customers by appointment only, please call (647) 400-3081 to schedule.