- Constructed of lightweight EVA foam for enhanced comfort
- The carbon fibre heating element covers the entire foot area and delivers uniform heat
- Anti-slip material beneath the insole prevents it from sliding around
- Can be switched from one shoe to the other
- Can be trimmed with scissors to fit any boot size
NOTE: We recommend that you wear a windproof and waterproof boot for maximum heat retention.
Scenario |
Required Wiring |
|---|---|
| You're a powersport rider that already owns heated leg chaps or pants that have a female coax output at the bottom. |
No additional wiring is required, as these heated insoles can connect directly to the hideaway plugs at the bottom of each chap |
| You're a powersport rider who doesn't own heated leg chaps or pants but already has some other piece of heated clothing, which came with a Coax Battery Cord. |
Optional: Single Temperature Controller (SKU 100230-1) to fine-tune the temperature. |
| You're a powersport rider who doesn't own any other pieces of heated clothing. You want to power the insoles directly from the 12V battery of your powersport vehicle. |
Y-switch-cord (SKU 100233-1) + Coax Battery Cord (SKU 100227-1). Optional: Single Temperature Controller (SKU 100230-1) to fine-tune the temperature. |
| You're on a snowmobile with an RCA outlet and there is one rider who wants to use the RCA outlet, for example, to power their heated helmet visor in addition to these heated insoles. |
Y-switch-cord (SKU 100233-1) + Male RCA to Female Coax & Female RCA Adapter (SKU 100285-1) Optional: Single Temperature Controller (SKU 100230-1) to fine-tune the temperature. |
|
You're on a snowmobile with an RCA outlet and there are two riders that both want to use the RCA outlet, for example, to power their own heated helmet visors in addition to these heated insoles. |
Y-switch-cord (SKU 100233-1) + Male RCA to Female Coax & Female RCA Adapter (SKU 100285-1) + Male RCA to 2 Female RCA Splitter (SKU 300227-1). Optional: Single Temperature Controller (SKU 100230-1) to fine-tune the temperature. |
Click here to view the PDF instruction manual in a new tab.
Seamless Connectivity
If you own other pieces of GEARS heated clothing, you can easily add this to your setup! The diagram below illustrates how to connect our heated clothing seamlessly. Gen-X3 and Gen-X4 are compatible with one another. Note that the heated jacket in the diagram below can be swapped with the heated vest.
FAQs
Q: What are the specs?
A: Connects to a 12-volt battery, provides 14.5 watts of heat and draws 1.2 amps/pair.
-----------
Q: Will this work alongside other brands of heated clothing?
A: Yes! All our heated clothing is compatible with Firstgear, Gerbing, Warm & Safe, and Venture Heat. If you own heated leg chaps from another brand that have male connectors near the bottom and you want to use these heated insoles, then you will need an adapter (SKU 100386-1) to connect them.
-----------
Q: What is the difference between Gen-X3 and Gen-X4?
A: Gen-X3 uses a copper-based heating element (made in the USA), whereas Gen-X4 uses Zepto fibres (made in France). Gen-X4 heats up faster, generates more heat, and is lighter. Both are amazing, but Gen-X4 is a bit of an upgrade!
Optional Portable Battery Add-on
Consider purchasing one of our Heated Clothing Portable Battery Kits (SKU 100268-1) if you'd like to use your heated insoles when you get off your vehicle. In other words, a portable battery will allow you to use these insoles while skiing, snowboarding, or just taking a walk on a cold day.
YOU MAY ALSO LIKE...
VISIT OUR WAREHOUSE
32-6635 Kitimat Road
Mississauga, ON, L5N 6J2
Walk-in customers by appointment only (Monday - Sunday between 11 AM and 3 PM)