Heated Gloves | Gen-X4

Connect directly to the 12V battery in your motorcycle, snowmobile, or ATV to keep your hands warm while riding, OR go off-road by adding a portable battery pack.

Info

• Leverages ZEPTO® fibre technology; made in France, these heating fibers are so thin you wouldn't be able to notice them if not for their tremendous heat output
• Soft, drum-dyed leather construction with an extra-long gauntlet, and hook-and-loop closure around the wrist for a snug fit
• Heats the entire length of each finger, thumb, and back of the hand
• Innovative rain squeegee wiper on the thumb of the left glove to help wipe the water off your helmet visor
• Windproof and waterproof breathable PORELLE insert keeps hands dry
• Engineered to pair seamlessly with our Gen-X3/X4 Heated Jacket Liner or Gen-X3/X4 Heated Vest Liner

Portable Battery Add-on

Consider purchasing one of our Heated Clothing Portable Battery Kits if you'd like to use your heated gloves when you get off your vehicle. In other words, a portable battery will allow you to use these gloves while skiing, snowboarding, or just talking a walk on a cold day.

Manual

Click here to view the instruction sheet in a new tab

Sizing

Measure your hand size in inches around the widest part of your hand (usually this is just below your knuckles). Reference the chart below to determine what size works for you:

Wiring

Seamless connectivity with our Gen-X3/X4 Heated Jacket or Gen-X3/X4 Heated Vest

• If you own the Gen-X3/X4 Heated Jacket liner, no additional wiring is required; simply connect via the convenient hideaway plugs at the end of each sleeve
• If you own a Gen-X3/X4 Heated Vest you will require the Snap-on Harness for Heated Gloves & Glove Liners (SKU 100226-1)

Without the Gen-X3/X4 Heated Jacket or Gen-X3/X4 Heated Vest

• No problem! You will require the Coax Battery Cord (SKU 100227-1) and one of the following:
• Y-cord with Temperature Controller for Heated Gloves & Heated Glove Liners (SKU 100273-1), which allows you to fine tune the temperature
• Y-switch-cord for Heated Gloves & Glove Liners (SKU 100228-1), which allows you to turn the gloves on/off

IMPORTANT: Do not attempt to connect the Gen-X2 gloves to any Gen-X3 or Gen-X4 heated apparel. Any attempt to do so will ruin the heated clothing and VOID your warranty immediately! Only heating elements are covered under warranty. Normal wear and tear is not a warrantable defect.

Seamless Connectivity Diagram

If you own other pieces of Gears heated clothing you can easily add this to your setup! The diagram below illustrates how to seamlessly connect our heated clothing. Gen-X3 and Gen-X4 are compatible with one another. Note that the heated jacket in the diagram below can be swapped with the heated vest.

Watch the video below for a walkthrough on connecting various pieces of our heated clothing 

Specs

• Gen-X4 Heated Gloves work in parallel (each glove uses 12 volts)
• Gloves (as a pair) draw 2.1 amps of current to produce 29 watts of heat