Knuckle Armor Heated Gloves | Gen-X4

Connect our electrically heated gloves directly to the 12V battery in your motorcycle, snowmobile, or ATV for non-stop heat. Or connect to a portable battery (sold separately) to stay warm if you're not riding.


SKU: 100387-1-XS

In stock! Ships within 48 hours.
Pickup available at GEARS Headquarters

Usually ready in 24 hours

View store information

Attention motorcycle, snowmobile, and ATV riders! Stay warm and protected on your rides with our Knuckle Armor Heated Gloves. With ZEPTO heating elements throughout the gloves, including to the tip of every finger, you'll experience non-stop heat up to 135°F (57°C) that connects directly to your vehicle's DC power system.

Interest piqued? Our gloves are engineered to deliver enhanced feel and sensitivity with the bike's controls, so you can stay in control and focused on the road ahead. The high-impact TPU knuckle protection, adjustable Velcro wrist closure, and Primaloft Silver 80g insulation offer excellent thermal properties and provide a high level of protection, stretch, and flexibility. Plus, the gloves are touchscreen compatible and equipped with PORELL, making them breathable and waterproof.

Desire for more? Our Knuckle Armor Heated Gloves are made with premium cowhide leather construction and have a pre-curved ergonomic fit with a cuff length optimized for under-jacket fit. You can also power them with a portable battery (sold separately) if you're not riding or connect them directly to the sleeve of your Gen-X4 Jacket Liner in seconds.

Action time! Don't let the cold weather hold you back from hitting the road. Order your Knuckle Armor Heated Gloves today and experience the warmth, protection, and flexibility you need to ride in comfort and style.


  1. If you own the Gen-X3/X4 Heated Jacket liner, no additional wiring is required; simply connect via the convenient hideaway plugs at the end of each sleeve.
  2. If you own a Gen-X3/X4 Heated Vest, you will require the Snap-on Harness for Heated Gloves & Glove Liners (SKU 100226-1)
  3. For standalone operation (i.e. direct connection to the 12V battery of your powersport vehicle) you need the Coax Battery Cord (SKU 100227-1) and the Y-cord with Temperature Controller for Heated Gloves & Heated Glove Liners (SKU 100273-1), which allows you to fine-tune the temperature. 

Choosing a size

Measure your hand in inches around the widest part, NOT including your thumb; usually, that's just below your knuckles.

Then, reference the chart below to determine what size works for you.

Hand size (inches)  Recommended glove size
7-7.5 X-Small
7.6-8 Small
8.6-9 Medium
9.1-9.5 Large
9.6-10 X-Large
10.1-10.5 2X-Large

Click here to view the instruction sheet in a new tab.


Optional Portable Battery Add-on

Consider purchasing one of our Heated Clothing Portable Battery Kits if you'd like to use your heated gloves when you get off your vehicle. In other words, a portable battery will allow you to use these gloves while skiing, snowboarding, or just taking a walk on a cold day.




Wiring – MUST READ ⚠️

IMPORTANT NOTE: Gen-X3/X4 heating clothing is not backwards compatible with Gen-X2 heated clothing. Attempting to connect this item to Gen-X2 heated clothing will ruin it and VOID the warranty. Only heating elements are covered under warranty. Normal wear and tear is not a warrantable defect.

Seamless Connectivity Diagram

If you own other pieces of GEARS heated clothing, you can easily add this to your setup! The diagram below illustrates how to connect our heated clothing seamlessly. Gen-X3 and Gen-X4 are compatible with one another. Note that the heated jacket in the diagram below can be swapped with the heated vest.

Seamless Connectivity for Heated Clothing

Watch the video below for a walkthrough on connecting various pieces of our heated clothing 


• Max Heat: 135°F @ 13W Each
• Power: 12V DC 1.1 Amp Each
• Premium cowhide leather construction.
• ZEPTO heating fibers run throughout glove, including to the tip of every finger.
• PORELL breathable water-resistant membrane.
• High-impact TPU knuckle protection.
• Pre-curved ergonomic fit.
• Touchscreen compatible index finger.
• Adjustable velcro wrist closure.
• Cuff length optimized for under-jacket fit.


Q: Will this work alongside other brands of heated clothing?

A: Yes! All our heated clothing is compatible with Firstgear, Gerbing, Warm & Safe, and Venture Heat.


Q: What is the difference between Gen-X3 and Gen-X4?

A: Gen-X3 uses a copper-based heating element (made in the USA), whereas Gen-X4 uses Zepto fibres (made in France). Thus, Gen-X4 heats up faster, generates more heat, and is lighter. Both are amazing products, but Gen-X4 is just a little bit of an upgrade!

Need help picking the perfect item or size? Ask our customer happiness team via the live chat in the corner or by calling (647) 400-3081. We reply fast!


Whether its powersports, snowsports, hunting, or hiking, you love being immersed in the great outdoors. When you choose GEARS you’re choosing a durable and thoughtfully designed product that will allow you to #SeizeYourAdventure.



Premium-feeling, glossy sticker with strong adhesive. Looks cool on cars, powersport vehicles, laptops, or water bottles! Limited to three per order.


Receive just three emails each year to stay informed about new product launches and exclusive offers